Recommendation R.114 Delete existing  5 and replace by the following: 5. International TDM channels to Recommendation R.112 should have the numbering scheme shown in Table 3/R.114. 6. The numbers assigned to the channels should be selected from the series applicable to the type of channel and should correspond to its position in the Figure 1/R.112 to Recommendation R.112. 7. International code independent and code dependent channels to Recommendation R.102 should have the numbering schemes shown in Tables 3/R.114 and 4/R.114, respectively. 8. The numbers assigned to the channels should be selected from the series applicable to the type of channel and should correspond to its position in Tables 2 to 4/R.102 to Recommendation R.102. 9. Channel numbering of 50 baud channels for branch-line muldexes conforming to Recommendation R.1xy should be in accordance with the numbering scheme in Tables 1/R.114 and 4/R.114. Add new Tables 3/R.114 and 4/R.114 as indicated: TABLE 3/R.114 Numbering scheme of code independent channels for TDM systems conforming to Recommendations R.112 and R.102 ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Nominal ³ Maximum degree of ³ Channel numbers ³ ³ modulation ³ isochronous distortion ³ R.112 ³ R.102 ³ ³ rate ³ due to sampling ³ (2400 bit/s) ³ (4800 bit/s) ³ ³ (bauds) ³ (%) ³ ³ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ ³ ³ ³ ³ ³ 50 ³ 8.3 ³ 5801 - 5815 ³ 5801 - 5831 ³ ³ ³ ³ ³ (5816 not used)³ ³ 100 ³ 8.3 ³ 6801 - 6807 ³ 6801 - 6815 ³ ³ 200 ³ 8.3 ³ 7801 - 7803 ³ 7801 - 7807 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ TABLE 4/R.114 Numbering scheme of code dependent channels for TDM systems conforming to Recommendation R.102